Fastest and best scratch remover tips on wooden furniture
Degradation and damage on the surface of wooden furniture is inevitable. But there are ways to simply repair scratched furniture. This article will guide you to the fastest and best scratch remover on wooden furniture.
Use special scratch remover glue for wooden floors
The best way to fix scratches on wooden floors is to use specialized scratch remover glue. This is considered as a solution to restore up to 95% of the original wooden floor. Specialized scratch removal glue is sold in many stores, so it is easy to find and buy this glue.
The simple way to do this is to choose the right glue color for the floor. Then spread the glue evenly over the scratch, the glue mixture will do the job of erasing the scratches and returning the original beauty to your floor.
How to fix scratches on wood floor with olive oil
Using olive oil to erase scratched wooden floors is something very few people know. The method is quite simple, pour a little olive oil on a soft towel and wipe it several times over the scratches so that the oil penetrates into the gaps, then the scratch will be blurred.
Especially adding a little crayon will make your floor return to its original state without a scratch. Moreover, both of the above factors are highly water resistant, so your wooden floor will be more durable.
Fix scratches on wood by grinding part of the surface treatment coating
If the surface treatment coating is thick enough, it can be sanded to reveal a better surface underneath. This is exactly the same as removing the old paint to reveal the new surface. You can use sandpaper and lubricant to smooth the surface of the coating first, or you can skip this step and use steel wool or paste to clean. The best abrasive should always be selected to effectively remove damage. In most cases, you should choose a high-smooth sandpaper with little to no damage to the surface. If you want to reduce the risk of abrasion through the surface treatment coating, you must not perform unnecessary operations to deepen the scratch depth on the coating. Rub around the scratch.
Use the heat of the iron to treat scratched wooden floors
Using the steam of an iron to treat scratched wooden floors is the most useful way today. Because when using an iron or a hair dryer set to high heat, the surface of the glass fibers can expand, making scratches on the floor.
How to proceed as follows: Use a damp cloth to place on the scratches, then use the iron to gently glide over the towel for 30-40 seconds. Repeat this cycle 4-5 times. Especially for wood floors, using this method can overcome minor scratches that are not significant.
Apply more surface treatment products
Even if you don't know what kind of coating is being used on the existing surface. You can still create new coatings based on existing surface treatments. Before applying a new coating, the surface of the coating can be polished or wiped flat with steel wool or sandpaper. If the initial surface treatment was performed by you and you still remember which surface treatment product was used, it is best to use the same surface treatment product as before.
If you don't remember or don't know the type of product you've used before, you have three options:
1. Use a mixture of oil and varnish or wipe-type varnish to clean
2. French polishing on the coated surface
3. Choose a film surface treatment product to provide the coating properties you need. For example, polyurethane can provide good durability. Many surface refinishers will spray a thin coat of synthetic paint after cleaning the coated surface, which is quick and effective.
Oil and varnish blends can be very effective in coloring lighter areas, and oil and varnish blends last longer than waxes. However, it is not good to use a mixture of oil and varnish on a table with a mirror-like surface. Because any scratches on the surface will be clearly visible, and because the oil and varnish mixture is soft, the coating that has formed is easily damaged. The best way in this case is to use glue or some other method to fix this type of surface.
French polishing is a very good option for repairing lightly damaged surfaces. In the 19th century, this technology was widely used. Today, this technology is still used in many parts of Europe, and the United States also uses it to "lighten" the old surfaces of antique furniture.
Use almond or walnut oil
Using almond oil and snails is a very effective way to treat scratched wood floors. Because in almonds and walnuts contain a very high amount of essential oils.
Use these two fruits to gently rub the scratch and then wipe it with a soft cloth. As soon as it is done, the scratches will be faded, making the floor return to its normal state. Pocket how to make this and see the surprise!